-
BrianJastram started the topic Slow Loading for MMW Pages in the forum Monitor My Watershed 1 weeks, 1 days ago
Is there a reason it sometimes takes so long for MMW site pages to load? Just navigating from one site to another or from a site page back to My Sites can take around 1 minute.
-
Shannon Hicks replied to the topic Sensor Values Unrealistic and Unchanging in the forum Environmental Sensors 1 weeks, 3 days ago
Sensor values of -9999 for the Hyrdos21 CTD sensor mean that the Mayfly board isn’t hearing any communication from the sensor. Did you carefully follow all the directions in the Monitoring Station Manual (specifically section 6) for preparing and programming a Mayfly for use with the Hydros21? The sensor’s default SDI12 channel number needs to b…[Read more]
-
Noori Nagra started the topic Sensor Values Unrealistic and Unchanging in the forum Environmental Sensors 1 weeks, 3 days ago
Hello,
Before installing my system outdoors, I ran a test with my sensors. However, the data I received did not change over the logging interval and seem highly incorrect to me. I have attached a screenshot from Monitor my Watershed on this post. Please let me know if you know of any ways that could help me to fix this issue.
Thank you so much…[Read more]
-
Mike Miller commented on the post, An Autonomous Lighted Insect Trap to Assess Aquatic Ecosystem Health 1 weeks, 5 days ago
Neil, thanks for your input. My background is in stream ecology and the engineering students I have been working with are providing the technological expertise that I certainly don’t have. I know the students have […]
-
neilh20 commented on the post, An Autonomous Lighted Insect Trap to Assess Aquatic Ecosystem Health 1 weeks, 6 days ago
Thanks so much for the posting. Fascinating. While R.Pi might be great for prototyping – it does require a lot of mW power, and it can’t be put to sleep. A great way of reducing total deployment costs is to have […]
-
HAT became a registered member 1 weeks, 6 days ago
-
Mike Miller wrote a new post 2 weeks ago
An Autonomous Lighted Insect Trap to Assess Aquatic Ecosystem Health University of Wisconsin mechanical engineering students are developing and testing a digital insect light trap that will use low-cost ultraviolet […]
-
Bino Maiheu became a registered member 2 weeks, 6 days ago
-
Michael Daniel replied to the topic Atlas Scientific Dissolved Oxygen Sensor Not Reading in the forum Environmental Sensors 3 weeks ago
I have both a pH and a DO sensor working on one of my data loggers., and I’ve had up to four Atlas Scientific sensors working at once using a sensor bridge: https://atlas-scientific.com/carrier-boards/sensor-bridge/ I currently have the sensors connected through the qwiic ports, and they seem to be working fine. Here’s my code, there’s a lot of…[Read more]
-
fisherba started the topic Communicate between Mayfly and ISCO 3700 in the forum Environmental Sensors 3 weeks, 6 days ago
I am aware of the existing trigger for ISCO 3700, that requires an external sensor to trigger the ISCO, both via a Mayfly. https://github.com/EnviroDIY/Trigger
I’m curious if folks have developed a way for the 3700 to notify the Mayfly that it has sampled, with sampling coming from either using the Liquid Level Actuator or an external sensor as…[Read more]
-
mattmichielsen became a registered member 3 weeks, 6 days ago
-
Shannon Hicks replied to the topic Could not wake modem for clock sync. in the forum Mayfly Data Logger 4 weeks, 1 days ago
The UUIDs for the various parameters are generated by the MonitorMyWatershed website. When you created the site for your particular station, you had to manually add whatever parameters you were interested in receiving from the Mayfly logger. It looks like you added the 3 parameters for the Hydros21 and one turbidity parameter for the OBS3 s…[Read more]
-
BrianJastram started the topic Parameter Alarm Function in the forum Monitor My Watershed 4 weeks, 1 days ago
Hello, I am familiar with the Monitor My Watershed function that alerts me with an email if one of my sites stops receiving sensor data. When will there be a function that sends me an email when my CTD sensor in a stream reaches 10 feet and alerts me to high water levels?
Best Regards
-
Noori Nagra replied to the topic Could not wake modem for clock sync. in the forum Mayfly Data Logger 4 weeks, 1 days ago
Hello,
I am still sadly having some difficulties and was wondering if you could help me overcome them.
This is the output I am recieving:
Now running DRWI_SIM7080LTE.ino on Logger Logger_GeorgeSchool_Creek
Using ModularSensors Library version 0.34.0
TinyGSM Library version 0.11.5Logger timezone is set to UTC -5
RTC timezone is set to…[Read more] -
Braedon replied to the topic Programming and troubleshooting Apogee SP-710 sensor in the forum Environmental Sensors 1 months ago
@shicks this is something I am still struggling with, and I am having hard time figuring out. I’ve added some pictures with some of the data I’ve been collecting. It seems that the logger is picking up that there is some diurnal cycle happening, but the values seem to not match what I would expect, or they can be wildly all over the place. If I…[Read more]
-
Jim Moore replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 1 months ago
I thought it wasn’t working on my Mac using Chrome but realized the download is slow. Took about 5 minutes to download a 6 MB file but no problems with the file.
-
Fiona replied to the topic Atlas Scientific Dissolved Oxygen Sensor Not Reading in the forum Environmental Sensors 1 months ago
James,
Did you ever resolve this? I’m having the same issue.
Thanks!
-
Jake Lemon replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 1 months ago
It is working now. Thanks!
-
Heather Brooks replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 1 months ago
@jlemontu-org @w3asa, the LimnoTech team has pushed out a fix for this issue. Please give it a try and confirm you are now able to download data.
-
Jim Moore replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 1 months ago
Since the data server still appears to be down is ther any way to download data via TSI which does seem to be working?
- Load More