Paul Dyer – EnviroDIY

Paul Dyer posted an update 7 years, 10 months ago

Still looking for an example on how to read 0-5 V at 16 bit resolution. Can’t seem to get it to work. Maybe my board is bad?
- Sara Damiano replied 7 years, 10 months ago
  
  I converted this to a forum post: http://envirodiy.org/topic/looking-for-a-bare-bones-16-bit-0-5v-dc-data-logger-sketch-to-build-off-of/
Paul Dyer posted an update 7 years, 10 months ago

Hello

Can anyone tell me when more example sketches will be listed? Looking for a bare-bones 16 bit 0-5V dc data logger to build off of.

Thanks

Paul
Paul Dyer replied to the topic Problem with Arduino IDE loading Mayfly board data from github website in the forum Mayfly Data Logger 8 years, 1 months ago

Marion

I had a similar problem. I assume you are using Arduino IDE 1.6.12, the latest version on the Arduino website. Even though the Getting Started With Mayfly says you can use Arduino IDE 1.6.5 or newer, the current version (1.6.12) does not seem to correctly support the Mayfly. I corrected my problems by downloading and using IDE 1.6.5.…[Read more]
Paul Dyer replied to the topic MayFly initialization problem in the forum Mayfly Data Logger 8 years, 1 months ago

I finally figured this out. The latest Arduino IDE (1.6.12) apparently does not support the MayFly. I installed 1.6.5 and got the board up and running using the example sketch. I suggest further investigation and possible modification of the instructions given in Getting Started
Paul Dyer started the topic MayFly initialization problem in the forum Mayfly Data Logger 8 years, 1 months ago

I am trying to connect a magnetic flow meter to the Mayfly. I have completed the work on the flow meter and have it generating a 4-20 ma signal proportional to flow velocity. I purchased a Mayfly to act as the data logger and ultimately transmit the data for analysis. I have been working with Arduinos for a short time, and have an UNO working…[Read more]
Paul Dyer became a registered member 8 years, 1 months ago

@pndyer