All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
Community Activity See all activity
Electromechpro replied to the topic SDI-12 Library in the forum Other Data Loggers 4 months, 4 weeks ago
Could you please look at porting the code to the new Arduino R4 UNOs? They use a different chip (Renesas RA4M1 (Arm® Cortex®-M4)), and I cannot get SDI-12 code to compile for those board definitions.
Electromechpro became a registered member 5 months ago
Electromechpro
@electromechpro
Andrew replied to the topic Issues with compiling modular sensors library in the forum Miscellaneous 5 months ago
I am also working through the learn EnviroDIY course (amazing resource and really thorough!) and having the same issues as letsid. I have tried the pio lib install to no avail. Any ideas of things to try next?
Andrew replied to the topic Issue w/ mac communicating w/ v0.5b board in the forum Mayfly Data Logger 5 months ago
I was actually having trouble with both. It is now working with the onboard socket.
neilh20 commented on the post, An Autonomous Lighted Insect Trap to Assess Aquatic Ecosystem Health 5 months ago
For the aspect of visual analysis – perhaps one of these hardware modules might be appropriate Which partly means choosing the size of a camera, seems like its is 2Mpixel or 5Mpixel There is also a discussion […]
neilh20 replied to the topic Suggestions for pictorial wiring diagrams in the forum Miscellaneous 5 months ago
Hi @braedon-dority, my take is that the first step is to have personal documentation to be able to repeat your work, and that you can read it. Just to be basic, part of the learning is how to do documentation that you can then read your self.
Personally I find I come back to a working sensor some years later – and then want a traceable reference…[Read more]
Stephen H replied to the topic Site visit log? in the forum Miscellaneous 5 months ago
Found it. Very useful for monitoring the stations.
https://www.envirodiy.org/wp-content/uploads/Field_Visit_Data_Sheet_13.pdf
Thx.
Shannon Hicks replied to the topic Issue w/ mac communicating w/ v0.5b board in the forum Mayfly Data Logger 5 months ago
Have you tried a different microSD card? Either it’s a defective card or sometimes one or more of the pins in the microSD card socket can get damaged when inserting a card and cause a short-circuit inside the socket that prevents the Mayfly from operating properly. Are you using the onboard microSD socket on the Mayfly board, or the optional v…[Read more]
Andrew replied to the topic Issue w/ mac communicating w/ v0.5b board in the forum Mayfly Data Logger 5 months ago
Update: I removed the SD card and everything started to work fine. That doesn’t really explain the problem though so would love it if someone has any ideas what was going wrong.
Andrew started the topic Issue w/ mac communicating w/ v0.5b board in the forum Mayfly Data Logger 5 months ago
Hello, I have been trying to connect to a board to get a sketch loaded on but the Arduino IDE is not communicating with the board. The errors I have received are:
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
I have followed this thread to try and trouble shoot the issue:…[Read more]