Community Activity

See all activity

• 

  Shannon Hicks replied to the topic Clarivue10 data logging problems in the forum Mayfly Data Logger 1 months, 2 weeks ago

  I assume you are using a Mayfly v1.1 board and not an older v1.0, because it had a hard time providing a stable 12v for that particular type of sensor.  But are you using the onboard 12v source by selecting 12v on the Grove voltage selector jumper, or are you using one of the new screw terminal boards that has its own 12v boost circuit on it?
• 

  Dave Bressler replied to the topic Monitor My Watershed Classes in the forum Monitor My Watershed 1 months, 2 weeks ago

  There are no workshops scheduled yet for 2025, but you can review past events and check in from time to time for new events under the Participate tab, https://www.envirodiy.org/envirodiy-events/.
• 

  Shannon Hicks replied to the topic Continous HAB monitoring in the forum Mayfly Data Logger 1 months, 2 weeks ago

  That all looks correct.  I usually put the Mayfly’s analog Grove jack voltage selector jumper to the 5v position because the old sensors required 5v for excitation, but supposedly these newer ones are happy with 3v to 15v, but we still use them at 5v and calibrate them with that excitation voltage.  If you connect the 6-pin screw terminal board s…[Read more]
• 

  nick replied to the topic Continous HAB monitoring in the forum Mayfly Data Logger 1 months, 2 weeks ago

  Shannon,

  I attached a picture of how I am connecting the C-FLOUR to the multipurpose screw terminal board. Can you let me know if this is the correct wiring and resistor amount, type, and location?

  Thank you.

   
• 

  Elliot Ma started the topic Clarivue10 data logging problems in the forum Mayfly Data Logger 1 months, 2 weeks ago

  We installed a ClariVUE10 turbidity sensor with a data logger in a creek a couple of months ago. It was working well and uploading data to MonitorMyWatershed.org without issues until 10/17, when it started reporting -9999 values for turbidity. We’ve verified that the sensor wiring is intact, and the internals of the logger appear to be f…[Read more]
• 

  Jonesy replied to the topic Can't add EnviroDIY ATmega Boards in the forum Mayfly Data Logger 1 months, 2 weeks ago

  Hi,

  Was a firewall at my school…got it fixed now. Thanks a lot!
• 

  Paulins Kill Watershed Community started the topic Monitor My Watershed Classes in the forum Monitor My Watershed 1 months, 2 weeks ago

  Hi there and I am happy to become a part of this project.  I would like to speak with a person regarding equipment and setting up a monitoring system.  Friends at other watersheds have indicated that stream equipment/ system trainings are available.  How do I locate these classes?
• 

  Paulins Kill Watershed Community became a registered member 1 months, 2 weeks ago

  

  Paulins Kill Watershed Community

  @paulinskillriver

  View Profile
• 

  Shannon Hicks replied to the topic Can't add EnviroDIY ATmega Boards in the forum Mayfly Data Logger 1 months, 3 weeks ago

  The file is there.  Is your computer behind a firewall that is blocking github?  What happens if you click on the link for the EnviroDIY json file?  You should see a simple text webpage with some code talking about packages and platforms.
• 

  Jonesy started the topic Can't add EnviroDIY ATmega Boards in the forum Mayfly Data Logger 1 months, 3 weeks ago

  Hello,

  I keep getting an error message when trying to download the EnviroDIY ATmega Board via this link on the software page:

  https://raw.githubusercontent.com/EnviroDIY/Arduino_boards/master/package_EnviroDIY_index.json

  Error message received:

  Error downloading…[Read more]
• Load More