All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
Community Activity See all activity
Matt Barney replied to the topic 2022 EnviroDIY Hardware Status and Availability in the forum Mayfly Data Logger 1 years, 6 months ago
Any estimate on when the LTE Bee modems will be back in stock, either here on EnviroDIY or on Amazon? -Thanks.
Jane became a registered member 1 years, 6 months ago
Jane
@buckje123
Jordyn MSUHydrogeology became a registered member 1 years, 6 months ago
Jordyn MSUHydrogeology
@msuhydrogeology
Shannon Hicks replied to the topic Mayfly v1.1 technical questions forum thread in the forum Mayfly Data Logger 1 years, 6 months ago
The sensor manufacturer has assured me that the sensors will work at 3.3v, and we’ve had experience with hundreds of them and concur, but they’ll also work just fine with the jumper set to 5v instead, so it’s your choice.
This thread is for overall technical questions about the hardware on the Mayfly v1.1 boards, so if you have other questions…[Read more]
Jim Moore replied to the topic Mayfly v1.1 technical questions forum thread in the forum Mayfly Data Logger 1 years, 6 months ago
@shannon I noticed that the specs for the Hydros 21 indicate 4.0 volts minimum. The junper on the Mayfly board is set for 3.3 V. Would you recomend changeing that to 5.0 Volts?
Jim Moore replied to the topic Mayfly v1.1 technical questions forum thread in the forum Mayfly Data Logger 1 years, 6 months ago
Thanks! I’ll plug that into my code.
-jim
Sara Damiano replied to the topic Mayfly v1.1 technical questions forum thread in the forum Mayfly Data Logger 1 years, 6 months ago
@w3asa Did you look at this example: https://github.com/EnviroDIY/ModularSensors/tree/master/examples/DRWI_Mayfly1. I think it’s almost exactly what you want.
Jim Moore replied to the topic Mayfly v1.1 technical questions forum thread in the forum Mayfly Data Logger 1 years, 6 months ago
@shannon I am setting up a new sensor station using the hydros 21 (due in tommorow) but I am not using the turbidity sensor. I deleted that section of the code but I wanted to add the humidity sensor. What do I need to put in the variable list? Here is what I have:
Variable* variableList[] = {
new MeterHydros21_Cond(&hydros),
new Me…[Read more]
Shannon Hicks replied to the topic 1.1 revB and Clarivue 10 Turbidity Sensor in the forum Mayfly Data Logger 1 years, 7 months ago
The Mayfly makes 3.3v, 5v, or 12v, as set by the jumpers on the headers next to each Grove socket. The ClariVue sensors need 9 or 12v, but at lower temperatures (below 5C) we’ve found that some of the sensor will stop working because the Mayfly can’t produce enough current at 12v at low temperatures. So to fix this issue, you can just change t…[Read more]
joeln became a registered member 1 years, 7 months ago
joeln
@joeln