All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
All content on EnviroDIY is licensed as Creative Commons Attribution-ShareAlike 4.0. Hardware designs on EnviroDIY are released under the CERN Open Hardware License 1.2. Alternative licenses are available. Learn more
Community Activity See all activity
Shannon Hicks replied to the topic Mayfly Board v0.5b – Communication with MWW in the forum Mayfly Data Logger 1 years, 10 months ago
It sounds like you’ve got one of the older Digi LTE cell boards? We retired most of ours in 2020 because they failed after a year or two of operation, which is why we developed our own LTEbee module based on the SIM7080. What does the data on you microSD card say the signal strength and battery voltage is since the station went offline?
Sara Damiano replied to the topic SensorModbusMaster in the forum Miscellaneous 1 years, 10 months ago
I also responded on GitHub (https://github.com/EnviroDIY/SensorModbusMaster/issues/25), but the endian-ness of your sensor simulator is not compatible. You simulator seems to be sending CDAB mixed-endian. SensorModbusMaster only supports ABCD or DCBA.
Chuck Weaver replied to the topic SensorModbusMaster in the forum Miscellaneous 1 years, 10 months ago
[Read more]
Chuck Weaver replied to the topic SensorModbusMaster in the forum Miscellaneous 1 years, 10 months ago
BTW I am using a teensy 4.1 module
Chuck Weaver started the topic SensorModbusMaster in the forum Miscellaneous 1 years, 10 months ago
Hi, I am trying to use the library SensorModbusMaster. I have but some questions on the Git repository but have not received any answers.
<p dir=”auto”>I want to pull floating point data and trying to figure this out. My sensor simulator is set up for sensor address 1 and register 2 to send out floating point data on two registers, little en…[Read more]
Chuck Weaver became a registered member 1 years, 10 months ago
Chuck Weaver
@cweaver
Hemanth Narayan Dakshinamurthy became a registered member 1 years, 11 months ago
Hemanth Narayan Dakshinamurthy
@hemanth_dakahinamurthy
Marcio Alberto became a registered member 1 years, 11 months ago
Marcio Alberto
@mralberto
BrianJastram replied to the topic Mayfly Board v0.5b – Communication with MWW in the forum Mayfly Data Logger 1 years, 11 months ago
Mayer, if the CR1220 battery powering the internal clock is low on voltage this could be causing a time mismatch and no connection during the cellular connection sequence.
Heather Brooks replied to the topic Transfer MMW Site Owner in the forum Monitor My Watershed 1 years, 11 months ago
Thanks for asking. The team at LimnoTech is working on a new hierarchical system for organizations that will allow for different levels of editing rights for multiple individuals. This will allow individuals other than the site owner/creator to manage the site. As I understand it, the target is to release this update by the end of the year. As for…[Read more]