Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Mayfly v1.1 technical questions forum thread

Home › Forums › Mayfly Data Logger › Mayfly v1.1 technical questions forum thread › Reply To: Mayfly v1.1 technical questions forum thread

2022-04-29 at 2:32 PM #16977
neilh20
Participant

    My USB connect to a rev1.1 board appears to be failing.

    It was working, and now its stop connecting to the PC, stops even causing an audible ding.

    If I take the same USB C cable and plug it in to the USB C of a Rev1.0A3 it sometimes works. Usually causes an audible ding, but sometimes doesn’t appear as a com port.

    I’ve rebooted my PC twice, and left the Rev1.1 board powered off overnight to see if it might recover.

    Just wondering any suggestions  for what might be the issue, or way of checking the driver.

    I am seeing the boards work through the FTDI connector.