Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Serial1 of MayFly could not communicate

Home Forums Other Data Loggers Serial1 of MayFly could not communicate Reply To: Serial1 of MayFly could not communicate

#17427
SPY
Participant

    Dear Shannon , I have already connected the GND of the Modem and GND of the Mayfly. Interfacing between Mega2560 to the Modem I have used of level converter ( 3.3V to 5 V) for TX1 and RX1 . Because the operating of the modem is 3.3 Volt and the the Mega is a 5 Volt.

    The operating of the Modem was a 3.3 Volt for the RX1 and TX1  and operating the mayfly also 3.3 Volt , so I connected directly without level converter. With this wire , modem still could not communicate with the mayfly. whether the communication function is not due to the difference in speed? Just information the baud rate modem fix 115600 bps and the mayfly 57600 bps.