Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Grove 4 pin terminal board

Home › Forums › Mayfly Data Logger › Grove 4 pin terminal board › Reply To: Grove 4 pin terminal board

2023-03-05 at 4:26 PM #17670
Mary
Participant

    I went with the ProTrinket/Mayfly solution. My problem is no red light on the ProTrinket, only a green, I have pushed the reset button on the ProTrinket but still no red light. Is there a setting under tools that needs to be changed? If you look up bootloader for the ProTrinket, it says the ProTrinket must be connected to a computer via USB. In the above instructions, the Mayfly is connected to the computer via USB and the ProTrinket is connected to the Mayfly. Is that my problem?

     

    I have loaded date/time and the blink sketch so I know the Mayfly is good.

    Attachments:

    1. IMG_1179-scaled.jpg

    2. IMG_1180-scaled.jpg

    3. IMG_1181-scaled.jpg