Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Error Compiling for Mayfly; ModularSensors

Home › Forums › Mayfly Data Logger › Error Compiling for Mayfly; ModularSensors

Tagged: 

Viewing 1 reply thread
  • Author
    Posts
    • 2024-07-05 at 11:54 AM #18556
      Elizabeth Watson
      Participant

        Hello,

        I’m currently trying to change the logger ID, input the variable list, and input the UUID List, but the sketch (DRWI_DigiLTE) keeps failing to compile. I’ll include both the error message as well as the sketch. I am at a loss with how to fix this and would appreciate any thoughts/suggestions! Thank you!

        Note: I removed my UUID codes, but in the initial sketch I made sure to copy paste them properly.

        Attachments:
        1. DRWI_DigiLTE-sketch.txt
        2. Arduino-1.8.19-error-compiling.txt
        3. DRWI_DigiLTE-sketch-1.txt
        4. Arduino-1.8.19-error-compiling-1.txt
      • 2024-07-05 at 1:31 PM #18561
        Sara Damiano
        Moderator

          You need to either upgrade your ModularSensors library from 0.34.0 to 0.35.0 or downgrade your SD fat library from 2.2.3 to 2.1.2.

          All the dependent libraries are updated all of the time and not all versions match with each other. It’s best to download the libraries as a package from the ModularSensors releases page on GitHub. That zip file should have *exactly* the version of each library you need for all the pieces to work together.

          • 2024-07-08 at 11:18 AM #18563
            Elizabeth Watson
            Participant

              Hello!

              Thank you for your response! I finally have the sketch uploaded.

              I am now having an issue with the cellular connection. When I ran the sketch, it said “could not wake modem for clock sync” and then it let me know that it would be saving to the SD instead. How can I fix this?

              I tried making sure everything was in the correct placement (SIM card in correctly, antenna on the CELL spot, LTE Bee pins fully in, etc) but there doesn’t seem to be an issue with that area. I have also activated my SIM card on Hologram and while it states it is active, it is not receiving any information.

              EDIT: I ended up making a separate post for the SIM card issue (https://www.envirodiy.org/topic/cannot-connect-to-internet-with-sim/)

        • Author
          Posts
        Viewing 1 reply thread
        • You must be logged in to reply to this topic.