Activity – EnviroDIY

Mike Miller wrote a new post 8 months, 2 weeks ago

An Autonomous Lighted Insect Trap to Assess Aquatic Ecosystem Health University of Wisconsin mechanical engineering students are developing and testing a digital insect light trap that will use low-cost ultraviolet […]
Bino Maiheu became a registered member 8 months, 3 weeks ago

Bino Maiheu

@binomaiheu

View Profile
Michael Daniel replied to the topic Atlas Scientific Dissolved Oxygen Sensor Not Reading in the forum Environmental Sensors 8 months, 3 weeks ago

I have both a pH and a DO sensor working on one of my data loggers., and I’ve had up to four Atlas Scientific sensors working at once using a sensor bridge: https://atlas-scientific.com/carrier-boards/sensor-bridge/ I currently have the sensors connected through the qwiic ports, and they seem to be working fine. Here’s my code, there’s a lot of…[Read more]
fisherba started the topic Communicate between Mayfly and ISCO 3700 in the forum Environmental Sensors 8 months, 4 weeks ago

I am aware of the existing trigger for ISCO 3700, that requires an external sensor to trigger the ISCO, both via a Mayfly. https://github.com/EnviroDIY/Trigger

I’m curious if folks have developed a way for the 3700 to notify the Mayfly that it has sampled, with sampling coming from either using the Liquid Level Actuator or an external sensor as…[Read more]
mattmichielsen became a registered member 8 months, 4 weeks ago

mattmichielsen

@mattmichielsen

View Profile
Shannon Hicks replied to the topic Could not wake modem for clock sync. in the forum Mayfly Data Logger 9 months ago

The UUIDs for the various parameters are generated by the MonitorMyWatershed website. When you created the site for your particular station, you had to manually add whatever parameters you were interested in receiving from the Mayfly logger. It looks like you added the 3 parameters for the Hydros21 and one turbidity parameter for the OBS3 s…[Read more]
BrianJastram started the topic Parameter Alarm Function in the forum Monitor My Watershed 9 months ago

Hello, I am familiar with the Monitor My Watershed function that alerts me with an email if one of my sites stops receiving sensor data. When will there be a function that sends me an email when my CTD sensor in a stream reaches 10 feet and alerts me to high water levels?

Best Regards
Noori Nagra replied to the topic Could not wake modem for clock sync. in the forum Mayfly Data Logger 9 months ago

Hello,

I am still sadly having some difficulties and was wondering if you could help me overcome them.

This is the output I am recieving:

Now running DRWI_SIM7080LTE.ino on Logger Logger_GeorgeSchool_Creek

Using ModularSensors Library version 0.34.0
TinyGSM Library version 0.11.5

Logger timezone is set to UTC -5
RTC timezone is set to…[Read more]
Braedon replied to the topic Programming and troubleshooting Apogee SP-710 sensor in the forum Environmental Sensors 9 months ago

@shicks this is something I am still struggling with, and I am having hard time figuring out. I’ve added some pictures with some of the data I’ve been collecting. It seems that the logger is picking up that there is some diurnal cycle happening, but the values seem to not match what I would expect, or they can be wildly all over the place. If I…[Read more]
Jim Moore replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 1 weeks ago

I thought it wasn’t working on my Mac using Chrome but realized the download is slow. Took about 5 minutes to download a 6 MB file but no problems with the file.
Fiona replied to the topic Atlas Scientific Dissolved Oxygen Sensor Not Reading in the forum Environmental Sensors 9 months, 1 weeks ago

James,

Did you ever resolve this? I’m having the same issue.

Thanks!
Jake Lemon replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 1 weeks ago

It is working now. Thanks!
Heather Brooks replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 1 weeks ago

@jlemontu-org @w3asa, the LimnoTech team has pushed out a fix for this issue. Please give it a try and confirm you are now able to download data.
Jim Moore replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 1 weeks ago

Since the data server still appears to be down is ther any way to download data via TSI which does seem to be working?
Jim Moore replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 1 weeks ago

here is attachment
Heather Brooks replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 1 weeks ago

@aufdenkampe, any update on this?
Jim Moore replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 1 weeks ago

I note the data server is still down. My Mac response is attached. “download.html” doesent show in my download file which I assume is because file doesn’t exist. Any update on the status of a fix?

Thanks

-jim
Heather Brooks replied to the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 2 weeks ago

Thanks for posting, Jake. The data download problem appears to have occurred after the recent release of Monitor My Watershed v. 0.17.0. A GitHub issue was created for the tech team, and we hope to have a fix soon.
Jake Lemon started the topic MMW Site Download Sensor Data in the forum Monitor My Watershed 9 months, 2 weeks ago

Hi All,

The Download Sensor Data function doesn’t seem to be working. I get a message saying “site wasn’t available”. This has been reported by volunteers as well.

Thanks

Jake
neilh20 commented on the post, New in Monitor My Watershed: Organization Site Ownership 9 months, 2 weeks ago

Thanks for the update, its nice to get the visibility on what is coming. Of course the real world is its also useful to know when something change, and then adapt to it ….. or sometimes its a case of figuring […]
Load More