Activity

@shicks Its working now. Thank you. But the issue is with the b_address_change sketch. This is the output.

13:12:30.112 -> ��fx������~�����x�f~������怘�f�f�f�f~~�ffx����憆���������f�~fxf���~����fx�������~f��x��������怘��f����f���~��x��fx�����������f~f�fx怘�������ff���ff��fx��xx��fx������x���fx�������~��xfx��~��x��fx���怘�f��fx�f�~��x��fx����怘

Did you make sure the sensor is properly wired to your Mega, (tip to 5v, sleeve to GND, and ring to data) and that the pin number in the sketch matches whatever pin number you connected the data line to?  If all the wiring is correct, then it might be an issue with the latest SDI12 library that a few people have reported.  You could try r…[Read more]

@shicks When I connect the tip-power, ring-ground, and sleeve-data Arduino IDE can’t read my port & the light on the Arduino Mega stops. What’s the reason? This is the output its giving me ”
<div>

12:06:33.721 -> Timeout value: 

</div>
<div>

12:06:33.721 -> -9999

</div>
<div>

12:06:33.721 -> Powering up sensors,…

[Read more]

The baud rate in the example sketches is usually 57600 or 115200, which is the rate for the Arduino board’s serial output port that it uses to communicate with your computer, not the sensor.  For whatever rate you choose, you have to manually change your IDE’s baud rate to match, otherwise you’ll just get gibberish on the monitor.  The baud rate o…[Read more]

@shicks I had a doubt related to the baud rate mentioned in the example sketches which is “115200” but for SDI-12 configuration of TEROS 12 its “1200”. Should I change it? Also if I change the address of the sensor will I be able to obtain data from the data logger provided by METER or do I have to set it to “0” each & every time I have to access…[Read more]

I’ve attached a screenshot from Meter Group’s Teros 12 Integrator Guide.  It shows the wiring scheme for the bare-wire version and the 3.5mm stereo plug version.  If you’ve got the sensor with the 3.5mm plug, then you’ll need to compare this diagram to whatever breakout board you’re using to match the tip, ring, and sleeve to the power, ground, a…[Read more]

@shicks For now I want to connect one Teros 12 but in future want to connect four. Also I have both Mega & Nano with me. The output is an audio jack for which I have bought a trs 3.5mm breakout board. I just want to display the sensor data on my computer & use a esp module to display it on some website for future purposes

How many sensors are you wanting to connect to your Arduino board?  Do you have a Mega, or Nano, or both?  What sort of termination is on the end of your sensors?  Are you just wanting to display instantaneous sensor data on your computer or are you trying to build a logging device?

can you suggest something?

Thanks, Yes, I noticed it came back pretty quickly.

The DNS is now resolving correctly, and I can reach Monitor My Watershed in multiple browsers and devices. If you’re still having trouble, please try purging your browser cache or opening a new private/incognito window. The domain is now set to auto-renew.

Thanks!

Hi @lance-lascari, the domain has been renewed, and access should be restored soon. I’ll keep an eye on it. Thanks!