Activity – EnviroDIY

neilh20 commented on the post, New Mayfly Data Logger and Accessories 3 years ago

thanks – neilh01@wllw.net. Great to see them on Amazon. Congrats a big milestone I’m sure.
I was discussing it with a Sonoma State Uni project, and they searched amazon found them and ordered the new boards. […]
Shannon Hicks commented on the post, New Mayfly Data Logger and Accessories 3 years ago

Nope, it’s a different issue related to the current-limiting circuitry in another part of the board, so a cap won’t help.
mbullard commented on the post, New Mayfly Data Logger and Accessories 3 years ago

OK. There was something on another thread about adding a capacitor to handle the inrush on the motor. Would this be the workaround?
Shannon Hicks commented on the post, New Mayfly Data Logger and Accessories 3 years ago

We’ll eventually publish the BOM when I get a chance. I’ve been doing sensor station maintenance and installation most of my time for the past couple weeks, along with getting all the products to Amazon and ready […]
Shannon Hicks commented on the post, New Mayfly Data Logger and Accessories 3 years ago

Just a little FYI, but the wiper on the Yosemitech Y511A sometimes causes issues if you’re powering the sensor directly from the Mayfly 1.0 revA3 (current release) onboard 12v boost regulator. I’ve come up with a […]
Henningl started the topic Using mkr485 sheild with mkr1400 on a Y511 sensor in the forum Other Data Loggers 3 years ago

Hey,

I’m trying to connect mkr458 with an Y511 sensor, I have followed the instrutions here, and tried different things to connect. Nonetheless, I get an “echo” of the “Raw request”. I think it’s a delay issue. Output and code attached.
neilh20 commented on the post, New Mayfly Data Logger and Accessories 3 years ago

Just wondering, will you be putting out the BOM with parts number?, in a location like https://github.com/EnviroDIY/EnviroDIY_Mayfly_Logger/tree/master/hardware. While I appreciate the overview on the new Mayfly, […]
mbullard commented on the post, New Mayfly Data Logger and Accessories 3 years ago

Great work! Cannot wait to get some of the wipered turbidity sensors in the field.
Anthony Aufdenkampe replied to the topic MonMW Server Error 500 on Browse and Sites in the forum Monitor My Watershed 3 years ago

We think we’ve got it resolved (thanks @ptomasula!).

The main MMW site is back up and data looks to be flowing to the database server again.

We’re rebuilding the tsa_catalog now, so there might be some short term glitches with interactions to TSA capabilities and sparkline plots.

Unfortunately, some data was lost last night, before were able to…[Read more]
Dave Bressler replied to the topic MonMW Server Error 500 on Browse and Sites in the forum Monitor My Watershed 3 years ago

Thank you @aufdenkampe! Very helpful and informative update.
Anthony Aufdenkampe started the topic MonMW Server Error 500 on Browse and Sites in the forum Monitor My Watershed 3 years ago

Hi All,

The Monitor My Watershed development team is working on a fix for today’s error with accessing any site information or data. It started last night and is connected to an issue that surfaced early this summer.

We implemented a short-term fix, but that’s not sticking.

We know what the long-term fix is, but it’s a bit more complicated to…[Read more]
neilh20 replied to the topic Presentation at INTECOL conference 2021 – An IoT sensor network for…. in the forum Miscellaneous 3 years ago

Thanks for sharing. Great project and good to hear benefits of low cost networking.:) Good luck with it.
James_NZ started the topic Presentation at INTECOL conference 2021 – An IoT sensor network for…. in the forum Miscellaneous 3 years ago

Kia ora Whanau (Hi friends),

I recently presented at the INTECOL Wetlands/Freshwater Science conference on an IoT Sensor Network I’m looking to develop using Mayflies. Here’s a link to the presentation which might be of interest to some of you:

https://youtu.be/NXgccSbwIVU

Happy to answer any questions.

Kind Regards,

James
neilh20 started the topic JTAG on Mayfly in the forum Miscellaneous 3 years ago

Has anybody seen a Mayfly freeze or got any thoughts on debugging it when frozen, or used the JTAG/Mayfly.

I’ve got an occurrence of a Mayfly frozen, and its about the 4th captured occurrence of it.
In each of the 4 cases I’ve had the FTDI connector on it, with the terminal capture program providing a time stamp, and latest is:

[2021-10-13…[Read more]
neilh20 started the topic Congrats to SaraD in the forum Miscellaneous 3 years ago

Hey congrats to @srgdamiano returning from maternity leave. Hope mother and baby did well with delivery process :). I hear its a process and doesn’t follow a schedule.

Any pics of the new addition to the family 🙂
Brian became a registered member 3 years ago

Brian

@blmcglynn

View Profile
Duke became a registered member 3 years ago

Duke

@dukelee

View Profile
David Lutz replied to the topic Mayfly not writing to SD card = possibly a libraries issue? in the forum Mayfly Data Logger 3 years ago

Shannon,

We had been using the EnviroDIY Libraries as well as libraries contained within the IDE itself. Our code uses sections of the sample logger sketch, but have been built out a bit to combine possible analog sensors as well as communicate with Xbee.

I’d be happy to share with you – it’s not super long and you’ll see that it is pretty…[Read more]
neilh20 replied to the topic How Do I Order The New Mayfly Monitor from Shop in the forum Mayfly Data Logger 3 years ago

Always a lot of work getting a new revision out and running compatibility tests. I always admired the way
Paul Stoffregen of PRJC created a fishbowl for the releases, one I remember with the Teensy had a process of managing/advertising the release and being clear about it being in beta https://forum.pjrc.com/threads/27689-Teensy-LC-Beta-Testing

@s…[Read more]
Fiona started the topic Atlas Scientific Code Help in the forum Environmental Sensors 3 years ago

Hi All,

I have everything I need to build out a system using the Mayfly and Atlas Scientific sensors, but I am stuck on how to integrate the Atlas Scientific code from menu a la carte into DRWI LTE. An electrical engineering volunteer created a shield that allows us to connect four sensors on their own electrically isolated carrier boards to the…[Read more]
Load More