Discussions – Anthony Aufdenkampe

Commented to: EnviroDIY Mayfly logger stations deployed in PA, DE and MN!

Beth, thanks for sending Walter the links to the sensor description in the Modular Sensors library ReadMe file! That is a great resource.

One important correction, the Campbell Sci. OBS3+ sensor is an ANALOG sensor, and therefore should be connected to one of the Aux Analog grove ports on the Mayfly’s lower left side. The Auxiliary Analog-to-Digital Converter (ADC) chip is, however, an I2C device, which is why the description mentions I2C.

Walter, if you read that ModularSensors sensor description carefully, you’ll also see that the OBS3+ works better with 5V of power, so you should move the power jumper on the Mayfly for the Aux Analog from switched 3.3V to switched 5V.

6 years ago

Commented to: EnviroDIY Mayfly logger stations deployed in PA, DE and MN!

We’re working on getting an example sketch for the stations shown in this post, using the GPRSbee cell phone wireless ratio. We’re also working on getting as much code as possible in our EnviroDIY GitHub code repository for the Mayfly: https://github.com/EnviroDIY/EnviroDIY_Mayfly_Logger
Stay tuned!

8 years ago

Commented to: Stone Control Structure – Flume

Nice job Dave! I really like the aesthetics of this one, and the narrow throat will definitely give it the low end sensitivity that you’re looking for.

10 years ago

@aufdenkampe