Discussions – Vinay Ayala

Commented to: Evaluating Maxbotix Ultrasonic Sensors for Monitoring Stream Base Flow

@Rory G I need some assistance testing my maxbotix MB-7386 and I posted my issues in the forum…can you please assist?

3 years ago

Commented to: My Experience Building an EnviroDIY Monitoring Station

Cheryl….I am still stuck…My sim card is active as it is showing that it is active on Hologram…then my SD card is recording data every 5 minutes…only 1 data point is sent yesterday around 6:10 pm…no other data is being sent anymore…any ideas on how to fix it or who to contact for help

3 years ago

Commented to: My Experience Building an EnviroDIY Monitoring Station

Will do.

3 years ago

Commented to: My Experience Building an EnviroDIY Monitoring Station

Thank you, I will try this.

3 years ago

Commented to: My Experience Building an EnviroDIY Monitoring Station

I followed the videos up until the very end. The only difference between what they are doing and what I am doing is that they are using the CTD sensors, which I do not have. Instead, I am only trying to log data from the sensors already embedded in the Mayfly (temperature, battery voltage, signal percent)
Attached is an image of the output in the Serial Monitor when I upload the DRWI_LTE program to the Mayfly. I am stuck at this part.

3 years ago

Commented to: My Experience Building an EnviroDIY Monitoring Station

Thank you… going over these now… hopefully I can get past the obstacles

3 years ago

Commented to: My Experience Building an EnviroDIY Monitoring Station

Hello Cheryl … good to know your experience… I am building the same and I am stuck too wondering if I can ping you for some help…any guidance will be greatly appreciated

3 years ago

@ayalavinay