Mentions – Activity – fisherba

dan@wachusett replied to the topic Hydros-21 Depth Temp Compensation in the forum Environmental Sensors 3 years, 6 months ago

Thanks @fisherba… I will take a look at the updated sketch. It seems like this correction should be part of the device firmware, but perhaps it was modified at some point and not included. I may try to apply this correction to my previous data downloads and see if fixes the issue. If so, then will update the sketch on the mayfly to perform this…[Read more]
Matt Barney replied to the topic HYDROS 21 no longer vented… any idea when this changed? in the forum Environmental Sensors 3 years, 7 months ago

@fisherba My March order has the stereo plug.
Matt Barney replied to the topic HYDROS 21 no longer vented… any idea when this changed? in the forum Environmental Sensors 3 years, 7 months ago

@fisherba – Thanks for sharing this! I’ll be very interested to learn what Meter tells you.

I see what you mean on their product page: “When used with the ZL6 data logger, you won’t require an additional sensor for measuring—and referencing—barometric pressure.”

However, both the sensor manual and the Integrator Guide in the Downloads secti…[Read more]
Matt Barney replied to the topic Wiring Ultrasonic sensor w/ temp compensator in the forum Mayfly Data Logger 4 years, 5 months ago

Apologies for resurrecting an old thread, but it is exactly on-topic for my situation.

I’m confused about wiring the MaxTemp. The ModularSensors documentation says to connect the red wire from MaxTemp to the MaxSonar’s pin 6 (V+). However, the MaxBotix datasheet shows no connection of the MaxTemp to V+. Likewise, @fisherba Beth’s photo above…[Read more]
Anthony Aufdenkampe replied to the topic GPRSBee in the forum Mayfly Data Logger 4 years, 9 months ago

Jim (@w3asa), I think the tutorial @fisherba mentioned back in Aug. 2018 is this one: https://envirodiy.github.io/LearnEnviroDIY/

We last updated it in April 2019 with our v0.2 release: https://github.com/EnviroDIY/LearnEnviroDIY/releases

So it is written for ModularSensors v0.21.2.

Otherwise, it is “complete” (but there is always room for…[Read more]
Sara Damiano replied to the topic best practices enabling debugging modular sensors using platformIO in the forum Mayfly Data Logger 5 years, 4 months ago

@fisherba – StreamDebugger is only needed if you include it in your program; it isn’t and never was a dependency of ModularSensors or TinyGSM. It’s not included in ModularSensors.
neilh20 replied to the topic Newbie Mayfly Setup for RS485 sensor to internet in the forum Mayfly Data Logger 6 years, 2 months ago

Thankyou @fisherba thankyou!!!. I got the Xbee SB6 wifi communicating to data.envirodiy.org

I’ve cloned locally github.com/EnviroDIY/ModularSensors
then set to develop
and copied
enviroDIYModularSensorsexampleslogging_to_EnviroDIY
Arduinoenv02nanolevel

Starting up platformIO I opened the folder Arduinoenv02nanolevel
in platformio.ini I set…[Read more]
neilh20 replied to the topic Newbie Mayfly Setup for RS485 sensor to internet in the forum Mayfly Data Logger 6 years, 2 months ago

Hi
I’m running into a low power issue with the sensors/RS485 turned off.
There is a backfeed going on, which leaves SW_3.3V at about 2V and LED3 comes on.

I think @aufdenkampe gave me a hint of this and described a solution
https://github.com/EnviroDIY/ModularSensors/issues/140 in discussion with @srgdamiano

However I can’t find it in the…[Read more]
Dimitris posted an update 6 years, 2 months ago

@fisherba Hi , I am coming from Greece/Europe. I would like to establish some monitoring stations here in my university (www.ntua.gr). I have tried to purchase the Mayfly but Amazon does not deliver this or the starter kit to Greece. Is there any thought for Mouser delivery channel ? In case I cant find anyone to deliver the data logger to…[Read more]
- fisherba replied 6 years, 2 months ago
  
  Hi Dimitris, I am just a Mayfly user, not the manufacturer or distributor. My understanding is that there are tariff and trade complexities in distributing it in Europe. I heard that the folks at the Stroud Center explored this when they first started distributing the Mayfly, but I don’t really know the details. All of the files that are available…[Read more]
neilh20 replied to the topic Newbie Mayfly Setup for RS485 sensor to internet in the forum Mayfly Data Logger 6 years, 2 months ago

Thanks @fisherba..
Great to see your code..

I’m trying though to see how I get up and going with PlatformIO

https://github.com/EnviroDIY/ModularSensors/tree/master/examples/logging_to_EnviroDIY
There is a platformio.ini

I’ve forked and then cloned into my local machine such that I have…[Read more]
neilh20 started the topic Newbie Mayfly Setup for RS485 sensor to internet in the forum Mayfly Data Logger 6 years, 2 months ago

Hi, I’m a newbie to Mayfly and looking for any hints on setting up an environment.

I’m planning the software on how to do a low power RS485 with logging/SD and sending to the internet (wifi then …) … solar powered of course … which means low power needs to be builtin from the start.

I’ve got my RS485wing board and proven the Pololu +12V b…[Read more]

@fisherba