Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Jrmichler

  • Profile picture of Jrmichler

    Jrmichler replied to the topic Mayfly 16 bit ADC errors in the forum Mayfly Data Logger 4 years, 8 months ago

    Finally got back to this project…

    The 6AA battery pack is wired to the “Ext 4-12V” solder pads.  The voltage divider consists of a 989K resistor soldered to the battery positive lead, connected to a 324K resistor, which is connected to Pin 20 (GND).  The connection between the two resistors is connected to both Pins 2 and 7.  I attached a sch…[Read more]

  • Profile picture of Jrmichler

    Jrmichler started the topic Mayfly 16 bit ADC errors in the forum Mayfly Data Logger 4 years, 8 months ago

    I am learning how to use a Mayfly.  I will be using two of the 10 bit ADC’s and one 16 bit ADC to start.  My application is best met by powering with a 6AA battery pack, so I started by measuring the battery voltage.  I wired a voltage divider with a 1 Meg resistor in series with a 330K resistor.  The divider is connected to both Pins 2 and 7, so…[Read more]

  • Profile picture of Jrmichler

    Jrmichler became a registered member 4 years, 8 months ago