Matt Barney

Thanks for the quick reply, Shannon. I was able to get the cables and the adapter all working, following your instructions.

-Matt

Thank you.

Thank you James!

Matt

OK, thanks for that clarification.

Matt

@fisherba My March order has the stereo plug.

@fisherba – Thanks for sharing this! I’ll be very interested to learn what Meter tells you.

I see what you mean on their product page: “When used with the ZL6 data logger, you won’t require an additional sensor for measuring—and referencing—barometric pressure.”

However, both the sensor manual and the Integrator Guide in the Downloads secti…[Read more]

Thanks @aufdenkampe – really appreciate that update, and all of the hard work by you and the team to fix and document these issues!

Note that the lost data appears to extend beyond May 7th, with very large data gaps each day from the 8th through 12th. The images attached below show these data gaps for 3 of our sites, with the UTC timestamp when…[Read more]

We are also seeing the data gaps that I believe @thomas-schanandore and @movingplaid have reported above across all 3 of the stations that I’ve checked.

In particular, there are large gaps (9- to 24-hours) every day since at least May 5th, followed by data resuming at 12:30UTC across every station. This suggests that something is failing on the…[Read more]

Hi All,

Just checking in to see if there is any news about the status of MMW. I haven’t been able to find relevant issues in the ODM2 Github site, so thought I’d share here what we’re seeing on MMW:

• The big Download Sensor Data button returns a Server Error (500).
• No sparkline plots are displayed.
• The 3 buttons for each variable are…

[Read more]

Hi Dan,

I’m curious whether it’s possible to identify Gen 1 vs Gen 2 Hydros21; are they labeled? I’m wondering what I’ve got.

Thanks,

Matt

Ok, I see. Thanks so much for taking the time to provide all these details – very helpful!

Best,
Matt

Trout Unlimited

Thank you both for those details!

So to be clear: if I have only 1 SDI-12 sensor on the bus, and it’s at address 0, it should work properly with ModularSensors, even if I’m averaging 6 readings and collecting conductivity, temp, and depth each time. Is that correct?

Thanks Anthony. That warning is pretty clear. But I wonder why that’s a constraint.

It looks like “0” is a valid address according to the SDI-12 spec, and Meter supports it. Perhaps there’s something in ModularSensors that doesn’t like it. Scanning through the code, I don’t see anything right off.

Matt

@srgdamiano
Hi Sara, any advice on the question above, about powerUp/powerDown vs. wake/sleep?

Matt

Thanks to both of you for your responses! I think I had just figured out the cause of my problem right about the time you were posting them, but needed to continue refining and testing my code before replying.

What’s working now is:

1. In the sensor’s setup() function, set trigger pin to an output
2. at powerUp(), set pin HIGH
3. at wake(), run the…

[Read more]

Trying to track down and eliminate my my Mayfly’s excessive power draw during sleep, I rebuilt my circuit to use the Mayfly’s onboard ADS1115 via voltage dividers, but got the same results; my sleep current is still around 6 mA. However, I discovered that if I disconnect the Turner’s wiper trigger wire from D10, sleep current drops to around…[Read more]