Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: Pin locations for Yosemitech Y510-B

Home › Forums › Mayfly Data Logger › Pin locations for Yosemitech Y510-B › Reply To: Pin locations for Yosemitech Y510-B

2022-01-06 at 12:39 PM #16234
Liz
Participant

    I just took off my DO sensor and am now testing the Turb (Y510) alone, I just moved the RXD and TXD from the adapter to pin 5 and 6. However when I do so only the TXD LED lights up when TXD wire is in pin D5 and the RXD LED will not light up, but when I plug the D6 and reverse the two pins only RXD LED lights up. So, I cannot get both LEDS to flicker and either way 5 or 6 the sensor is outputting -9999. So currently either one of the two LED lights are steadily on not flickering.