Welcome to EnviroDIY, a community for do-it-yourself environmental science and monitoring. EnviroDIY is part of WikiWatershed, an initiative of Stroud Water Research Center designed to help people advance knowledge and stewardship of fresh water.
New to EnviroDIY? Start here

Reply To: New Xbee Modem: XB3-C-GM1-UT-001

Home › Forums › Mayfly Data Logger › New Xbee Modem: XB3-C-GM1-UT-001 › Reply To: New Xbee Modem: XB3-C-GM1-UT-001

2024-09-18 at 4:33 PM #18660
Shannon Hicks
Moderator

    That’s a good find.  We haven’t tried one of those with the Mayfly boards yet, but we’ll have to buy one and see what all might be needed to get it to work properly.  Previous Digi boards required our now-discontinued bee adapter board to change the pin assignments and power supply options in order to work with the Mayfly v0.5 boards.   But the latest Mayfly boards give you the ability to change bee header pins and power settings by adjusting various solder jumpers on the back of the Mayfly.  Similar adjustments to the sketch would be needed as well to make sure everything matched up properly.  But we’ll order a few of those Digi modules and do some testing and if it all looks good, we’ll add an example sketch to the library.